Procedures for Factory Installed TRIND
Positioning Overhead Antennas
Page 6-2 MDE-3664B TRIND® Start-up, Service, and Parts Manual · June 2013
4
Slide the antenna back towards the unit until the bolts stops in the slots and the molded part of
the antenna bracket is secure inside the bracket fork.
Note: Before tightening the bolts, ensure that the cables coming from the antenna are securely
positioned inside the stamped groove part of the bracket and are not trapped under the
bracket.
5
Tighten the bolts that secure the antenna into position using the 3/8-inch nut driver or
equivalent.