Page 5-9
System Integrity Test
VaporTEK Calibration Start-up Sequence
MDE-5394B VaporTEK™/VaporTEK-3 Controller Board 110 V UL® Vapor Recovery Collection System for Encore® 500 S
Start-Up and Service Manual · March 2019
System Integrity Test
To perform the system integrity test, proceed as follows:
1
Press the
Start
button (green button) on the FB1 terminal until the following screen opens and
then press
1
.
Figure 5-13: System Integrity Test - Service Screen
2
When the screen shown in
opens, press
2
.
Figure 5-14: Identifying System Screen
3
When the screen shown in
opens, press
4
to start the simulation.
Figure 5-15: Simulation with FB1 Screen
4
Select the dispenser side (1 or 2) that you want to simulate.
Figure 5-16: Selecting Side Screen
