MDE-5412C Passport® EDGE Installation and Start-up Manual · February 2019
Page 67
Passport Edge Software Setup
11
When the prompt to restart the module is displayed, click
Restart Module
and then click
OK
to make the changes active.
Figure 97: Making Changes Active
12
Select Local IP Config and the screen as shown in figure
Figure 98: Local IP Config Screen
13
Program one of the two IP addresses listed in the table.
Note: The IP used will/should reflect the CWS it is connected to.
Customer Display Number
Main IP Address
Subnet Mask
Default Gateway
Customer Display one
10.5.61.102
255.255.254.0
10.5.60.1
Customer Display two
10.5.61.103
255.255.254.0
10.5.60.1
