Page 62 MDE-5412C Passport® EDGE Installation and Start-up Manual · February 2019
Passport Edge Software Setup
10
Select and expand
Network Interface
>
TCP/IP
>
Basic Information
tab.
Figure 89: Network Interface - Basic Information
11
Program one of the two IP Addresses found in the following form into the correct sections of
the Epson TCP/IP programming screen.
Note: The IP address used will/should reflect what CWS it is tied two. Ensure that the
acquired IP address is set to manual and all other settings are set as shown in
Figure 90: Network Configuration
Receipt Printer Number Main IP Address Subnet Mask
Default Gateway
Receipt Printer One
10.5.61.52
255.255.254.0 10.5.60.1
Receipt Printer Two
10.5.61.53
255.255.254.0 10.5.60.1
12
Once the IP Address information is entered, click
Send
. Press
Reset
once it is displayed on
screen.
