19
Projecting the DECT network
Positioning the base stations in the plan
Now enter the base stations.
u
The example shows five base stations.
u
One base station is used to show how, by drawing in transmission directions for the
wireless signal, you can estimate how many base stations can see each other and
which building areas the wireless signal could reach.
u
For the hotspot in the room at the top left, two additional base stations have been
planned in parallel.
u
If full wireless coverage is required for the stairwell, measurements must be performed
to check whether a further base station has to be located here.
u
You must also check whether the base stations planned are sufficient for the second
hotspot.
You then check these initial assumptions later using the measurements (
WC/
store
Computers
Stairs
HS
HS
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
