Gigaset N300A IP Configuration Manual Download Page 6

Page: 6 / 17

6. The Configuration Assistant

The configuration assistant offers a quick method to implement the settings that are essential
for communication between the base station and the gnTel platform, and that link the proper
Phone account data with the base station.

The configuration assistant can be used after a reset to factory defaults, but also to configure
new connections (see chapter ‘

Definitions and abbreviations

’).

For each new connection, the Configuration Assistant can be used.

1. Click the tab ‘Settings’ ➡ section ‘Telephony’. The ‘Overview of connections’ is shown.

2. For the connection that now needs to be configured, click ‘Edit’.

3. It is now possible to change the name of the connection to be configured. Then clck

‘Start Configuration Assistant’.

Configuration manual for Gigaset DECT phones on the gnTel platform - version final 1.0 - May 2017 6

Summary of Contents for N300A IP


















Search results

Summary of Contents for N300A IP

Reviews:

Related manuals for N300A IP

Brands by name

Popular brands

Gigaset N300A IP, Configuration Manual

Search results

Summary of Contents for N300A IP

Reviews:

Related manuals for N300A IP

Brands by name

Popular brands