Gigaset CX203isdn User Manual Download Page 70

Page: 70 / 159

Making cost-effective calls

Gigaset S44 / englisch / A31008-M368-B103-1-7619 / charges.fm / 21.2.05

Displaying and deleting the charge overview

Call or charge units for either each internal subscriber, each configured MSN or the

entire system are displayed, depending on the setting.

Activating/deactivating the charges for the last call

You can display the total charges and the charges of the last call for this handset on the

handset.

Requirement:

MSN next call

not

activated.

By default,

Last charge

is deactivated.

After activating the function, the call charges are displayed on the handset when you

press and hold the Talk key

Call Charges

Cost overview

Scroll to the accounts for the individual internal sub-

scribers or configured MSNs.

If necessary, delete the amount from the charge

overview:

Press the display key to open the submenu.

Delete amount

Select and confirm.

Total and individual charges must be deleted separately, i. e., if you delete

the amount for an MSN, the individual charges for the handsets are

retained, and must be deleted separately.

Call Charges

Last charge

Select and confirm (

‰

= activated).

Summary of Contents for CX203isdn
































































































































































Search results

Summary of Contents for CX203isdn

Reviews:

Related manuals for CX203isdn

Brands by name

Popular brands

Gigaset CX203isdn, User Manual

Search results

Summary of Contents for CX203isdn

Reviews:

Related manuals for CX203isdn

Brands by name

Popular brands