Gigaset CX203isdn User Manual Download Page 121

Page: 121 / 159

118

Operation in a PABX

Gigaset S44 / englisch / A31008-M368-B103-1-7619 / pabx.fm / 21.2.05

Activating/deactivating the keypad during a call

In addition to the permanent settings described above, you can also switch temporarily

to the keypad.
The setting only applies to the current external call and is automatically deactivated

after the call is ended.
During a call:

Activating the keypad for the next connection

All dialling characters (

0–9, *, #

) will be sent as a string of keypad characters with the

next connection (dial and call). In the connection status, the keypad is retained and is

not automatically switched to tone dialling (DTMF).

Open menu.

either ...

To activate the keypad:

Keypad on?

Select and confirm.

Enter the keypad code.

or ...

To deactivate the keypad:

Keypad off?

Select and confirm.

Base

Call preparat.

Temp. keypad

Select and confirm (

‰

= activated).

Summary of Contents for CX203isdn
































































































































































Search results

Summary of Contents for CX203isdn

Reviews:

Related manuals for CX203isdn

Brands by name

Popular brands

Gigaset CX203isdn, User Manual

Search results

Summary of Contents for CX203isdn

Reviews:

Related manuals for CX203isdn

Brands by name

Popular brands