Gigaset CX203isdn User Manual Download Page 12

Page: 12 / 159

Setting up the handset for use

Gigaset S44 / englisch / A31008-M368-B103-1-7619 / starting.fm / 21.2.05

Range and reception strength

Range:

◆

Up to 300 m in the open

◆

Up to 50 m in buildings

Reception strength:

The display shows the quality of the radio contact between the base station and the

handset:

◆

Good to poor:

Ð i Ñ Ò

◆

No reception:

flashes

Switching the handset on/off

Activating/deactivating the keypad lock

You will hear the confirmation beep. The icon

appears in the display when the

keypad lock is activated.
The keypad lock is deactivated automatically if someone calls you. It is re-activated

when the call is finished.

Press and

hold

the End call key.

You will hear the confirmation beep.

Press and

hold

the hash key.

◆

You can call the specified emergency number (page 84) even when

the keypad lock is activated.

◆

The handset displays an advisory message if you press a key by

accident while the keypad lock is activated. To deactivate the keypad

lock, press and

hold

the hash key

Summary of Contents for CX203isdn
































































































































































Search results

Summary of Contents for CX203isdn

Reviews:

Related manuals for CX203isdn

Brands by name

Popular brands

Gigaset CX203isdn, User Manual

Search results

Summary of Contents for CX203isdn

Reviews:

Related manuals for CX203isdn

Brands by name

Popular brands