Gigaset C610 User Manual Download Page 75

Page: 75 / 96

Customer Service & Assistance

Gigaset C610/C610A / GBR / A31008-M2305-L101-1-7619 / appendix.fm / 18.03.2011

rsion 4, 16.0

.2005

Questions and answers

If you have any questions about the use of
your phone, you can contact us 24/7 at
www.gigaset.com/service.

The table below contains a list of common
problems and possible solutions.

The display is blank.

1. The handset is not switched on.

Press and

hold

the end call key

2. The battery is flat.

Charge the battery or replace it
(

page 12).

Not all menu options are displayed.

The menu display is reduced (

Standard mode

Activate extended menu display (

Expert

mode

•

) (

page 26).

No Base

flashes on the display.

1. The handset is outside the range of the base.

Move the handset closer to the base.

2 The range of the base is reduced because eco

mode is activated.

Deactivate eco mode (

page 57) or

reduce the distance between the handset
and the base.

3. The base is not switched on.

Check the mains adapter of the base
(

page 10).

Please register handset

flashes on the display.

Handset has not been registered with the base or
has been deregistered.

page 58).

Handset does not ring.

1. The ringtone is deactivated.

Activate the ringtone (

page 66).

2. Call divert set for "All Calls".

Deactivate call divert (

page 33).

3. The telephone only rings when the phone

number is transferred.

Activate the ringtone for anonymous calls
(

page 66).

You cannot hear a ringtone/dialling tone from
the fixed line network.

The phone cord supplied has not been used or
has been replaced by a new cord with the wrong
pin connections.

Please always use the phone cord supplied or
ensure that the pin connections are correct
when purchasing from a retailer (

page 10).

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

Reset the system PIN to 0000 (

page 69).

Forgotten the system PIN.

Reset the system PIN to 0000 (

page 69).

The other party cannot hear you.

You have pressed the mute key

. The handset

is "muted".

Activate the microphone again (

page 31).

The number of the caller is not displayed
despite CLIP.

Calling Line Identification is not enabled.

The caller

should ask the network provider to

enable Calling Line Identification (CLI).

You hear an error tone when keying an input

(a descending tone sequence).

Action has failed/invalid input.

Repeat the operation.
Watch the display and refer to the user guide if
necessary.

You cannot listen to messages on the network
mailbox.

Your PABX is set for dial pulsing.

Set your PABX to tone dialling.

Summary of Contents for C610

































































































Search results

Summary of Contents for C610

Reviews:

Related manuals for C610

Brands by name

Popular brands

Gigaset C610, User Manual

Search results

Summary of Contents for C610

Reviews:

Related manuals for C610

Brands by name

Popular brands