Gigaset C610, User Manual

Page: 60 / 96

58
Setting the alarm clock
Gigaset C610/C610A / GBR / A31008-M2305-L101-1-7619 / registr_sett.fm / 18.03.2011
V
e
rsion 4, 16.0
9
.2005
Setting the alarm clock
Precondition: The date and time have
already been set (
¢
page 16).
Activating/deactivating the alarm
clock and setting the wake-up time
v
¢
É
¢
Alarm Clock
¤
Change multiple line input:
Activation:
Select On or Off .
Time:
Enter the wake-up time in 4-digit format.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
In idle status, the
¼
icon and wake-up time
are displayed.
A wake-up call is signalled on the display
and with the selected ringtone (
¢
page 2).
The wake-up call sounds for 60 seconds. If
no key is pressed, the wake-up call is
repeated twice at five minute intervals and
then switched off.
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze
mode)
Precondition : A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
Using several handsets
Registering handsets
You can register up to six handsets to your
base.
A Gigaset C610H handset can be registered
on up to four bases.
Manual registration of the
Gigaset C610H on Gigaset C610/
C610A
You must activate manual registration of the
handset (1) on both the handset (2) and the
base.
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g.
INT 1 . If not, repeat
the procedure.
1) On the handset
The handset must not be registered to a
base.
§Register§
Press the display key.
The handset is already registered to a base:
v
¢
Ï
¢
Registration
¢
Register Handset
If the handset is already registered on four
bases:
s
Select base, e.g. Base 3 and
press
§OK§
.
~
If required, enter the system
PIN for the base and press
§OK§
.
A message displays that a search for a base
that is ready for registration is being carried
out.
2) On the base
Within 60 seconds press and hold the reg-
istration/paging key on the base
(
¢
page 3) (approx. 3 seconds).