Gigaset C610, User Manual

Page: 12 / 96

10
First steps
Gigaset C610/C610A / GBR / A31008-M2305-L101-1-7619 / starting.fm / 18.03.2011
V
e
rsion 4, 16.0
9
.2005
Setting up the base and charging cradle (if included)
The base and charging cradle are designed for use in enclosed dry rooms with a
temperature range of +5°C to +45°C.
¤
Install the base on a level, non-slip surface in a central location in your house or
flat or mount the base or charging cradle on the wall
¢
page 82.
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
Connecting the base
¤
First connect the
telephone jack
2
and insert the cables
into the cable ducts.
¤
Then connect the
mains adapter
1
.
Please note:
u
The mains adapter must always be connected , as the phone will not operate
without a mains connection.
u
Only use the mains adapter and phone cord supplied . Pin connections on
telephone cables can vary (pin connections
¢
page 77).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode (
¢
page 57) is activated.
1
1
1
2