Gigaset C610, User Manual

Page: 64 / 96

62
Using a handset as a room monitor (Babyphone)
Gigaset C610/C610A / GBR / A31008-M2305-L101-1-7619 / registr_sett.fm / 18.03.2011
V
e
rsion 4, 16.0
9
.2005
Using a handset as a
room monitor
(Babyphone)
If the room monitor is activated, a previously
saved destination number is called as soon
as a set noise level is reached. You can save
an internal or external number in your hand-
set as the destination number. All of the
handset keys are deactivated, with the
exception of the display keys.
The room monitor call to an external
number is terminated after approximately
90 seconds. The room monitor call to an
internal number (handset) stops after
approx. 3 minutes (depending on the base).
When the room monitor is activated, all keys
are locked except the end call key. The hand-
set's speaker can be switched on or off (
Two
Way Talk = On or Off ). If Two Way Talk is
switched on, you can answer the room
monitor call.
When the room monitor is activated, incom-
ing calls to the handset are indicated
with-
out a ringtone and are only shown on the
screen. The display and keypad are not illu-
minated and advisory tones are also turned
off.
If you accept an incoming call, the room
monitor is suspended for the duration of the
call, but the function
remains activated.
If you deactivate then reactivate the hand-
set, the room monitor remains activated.
Activating the room monitor and
entering the destination number
v
¢
É
¢
Room Monitor
¤
Change multiple line input:
Activation:
Select On to activate.
Alarm to:
Select Internal or External .
External number: Select the number
from the directory (press display key
ö
)
or enter it directly.
Internal number: Select display key
§Change§
¢
Select handset or Call All if
you want to call all registered handsets
¢
§OK§
.
In idle status, the destination number or
the internal destination number is dis-
played.
Two Way Talk:
Switch the handset's speaker on or off
(select
On oder Off ).
Sensitivity:
Select sensitivity for noise level ( Low or
High ).
Warning!
u
You should always check the opera-
tion of the room monitor before use.
For example, test its sensitivity.
Check the connection if you are
diverting the room monitor to an
external number.
u
When the function is switched on, the
handset's operating time is considera-
bly reduced. If necessary, place the
handset in the base/charging cradle.
This ensures that the battery does not
run down.
u
Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u
The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.