Guidelines / Manual
BTS256-LED Tester / Page 21
Software for Remote Control Measurements and Documentation ( Continued )
Version 01.2009-01
The G.O.O.S. software for the
•
BTS256-LED-150
•
BTS256-LED-300
•
BTS256-LED-500
is identical to the model BTS256-LED
except for the extra LPS-100 lamp
power supply set-up function used to
power the auxiliary lamp for large size
integrating spheres.
The Phi button (1) opens the configura-
tion window.
The AUX Power Supply button (2)
opens the LPS-100 lamp power supply
configuration window used to operate
the auxiliary lamp.
Configuration of the power supply is
done by the manufacturer during the
instrument set-up and should only
be changed if a different power lamp
is used.
The substitution correction button (3)
opens the operation window.
First step is to switch on the auxiliary
lamp (4) and confirm the lamp current
with OK button (5). The auxiliary lamp
is arrives at full power under a ramp
function and then reaches stabilization.
This process takes a few minutes. The
time remaining is displayed in the infor-
mation window (6).
1
2
3
4
5
6
