Gigabyte R182-N20 User Manual Download Page 95

Page: 95 / 114

- 92 -

BIOS Setup

5-3-10 Runtime Error Logging Settings

Parameter

Description

Runtime Error Logging

System Errors

Enable/Disable system error logging function.
Options available: Enable, Disable. Default setting is

Enable

S/W Error Injection Support

Enable/Disable software injection error logging function.
Options available: Enable, Disable. Default setting is

Disable

Whea Settings

Press [Enter] to configure advanced items.

WHEA (Windows Hardware Error Architecture) Support

– Enable/Disable WHEA Support.

– Options available: Enable, Disable. Default setting is

Enable

Memory Error Enabling

Press [Enter] to configure advanced items.

Memory Error

– Enable/Disable Memory Error.

– Options available: Enable, Disable. Default setting is

Enable

Memory Corrected Error

– Enable/Disable Memory Corrected Error.

– Options available: Enable, Disable. Default setting is

Enable

Uncorrected Error disable Memory

– Enable/Disable the Memory that triggers Uncorrected Error.

– Options available: Enable, Disable. Default setting is

Disable

Summary of Contents for R182-N20



















































































































Search results

Summary of Contents for R182-N20

Reviews:

Related manuals for R182-N20

Brands by name

Popular brands

Gigabyte R182-N20, User Manual

Search results

Summary of Contents for R182-N20

Reviews:

Related manuals for R182-N20

Brands by name

Popular brands