Gigabyte R152-Z33 User Manual Download

Page: 69 / 139

- 47 -

BIOS Setup

5-2-10

Network Stack Configuration

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv4 PXE Support

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv4 HTTP Support

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is

Disabled

Ipv6 PXE Support

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv6 HTTP Support

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is

Disabled

PXE boot wait time

Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.

Summary of Contents for R152-Z33












































































































































Search results

Summary of Contents for R152-Z33

Reviews:

Related manuals for R152-Z33

Brands by name

Popular brands

Gigabyte R152-Z33, User Manual

Search results

Summary of Contents for R152-Z33

Reviews:

Related manuals for R152-Z33

Brands by name

Popular brands