MS800
2-6
2.4 Using the stylus
Use the stylus to touch or write on your screen.
Using stylus can avoid damaging your screen. There
are 2 ways to use your stylus:
●
Tap: softly tap on a desired item by your stylus,
and lift the pen from the screen.
●
Press: touch and hold your stylus on a desired
item for a few seconds until a blue dotted circle
appears. This indicates that a pop-up menu is
going to be activated.
2.5 Screen alignment
When using MS800 for the first time, screen
alignment is required. If you find that the device does
not accurately respond to your stylus taps, or you
have performed a system reset, you need to align
your screen again.
1.
Tap Start > Settings > System tab > Screen >
General tab.
2.
Tap Align Screen on your screen.
3.
On the align screen, use your stylus to touch the
crosses on the screen accurately.
4.
Tap OK to exit.
2.6 Input method
Block Recognizer
With Block Recognizer, you can input character
strokes (using the stylus) that are similar to those
used on other devices.
1.
On your screen keyboard, tap the arrow icon
next to the keyboard icon for more input methods.
On the pop-up list, tap Block Recognizer.
2.
Write letters and numbers in a corresponding
field, the system will display the letters/numbers
identified from your handwriting.
3.
Do not write letters/numbers continually to
prevent recognition error.
4.
Do not write letters outside of the input fields.
Keyboard
You can input data by using screen keyboard. Tap
icon on your screen to open the screen keyboard
.
Follow the steps below to input your data:
1.
On your screen keyboard, tap Shift or CAP key to
input a capital letter or to input multiple symbols.
2.
Tap the key on your screen keyboard to delete.
3.
To close the screen keyboard, tap
icon
again on your screen to hide the screen
keyboard.
Letter Recognizer
1.
On your screen keyboard, tap the arrow icon next
to keyboard icon for more input methods. On the
pop-up list, tap Letter Recognizer.
2.
Write letters and numbers in a corresponding
field on your Letter Recognizer screen. MS800
will display the letters/numbers that you had just
input in Letter Recognizer fields.
3.
Tap the
key to delete an input.
Transcriber
Transcriber allows you to write on the full screen
using the stylus just as you would write on paper.
Unlike Letter Recognizer and Block Recognizer, you
Note:
To change the displayed keyboard size
on the screen, tap the arrow beside keyboard
icon and tap Options. Under Input screen, you
may select either Large keys or Small keys by
tapping on its radio button.
Summary of Contents for GSmart MS800
Page 1: ...MS800 ...
Page 57: ...8 5 MS800 ...
