Gigabyte GA-Z77X-UD4H User Manual Download Page 49

Page: 49 / 120

- 49 -

BIOS Setup

CPU Vcore/Dram V3.3V/+12V

Displays the current system voltages.

CPU/PCH/System Temperature

Displays current CPU/Chipset/System temperature.

CPU/System Fan Speed

Displays current CPU/system fan speeds.

CPU Warning Temperature

Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS

will emit warning sound. Options are: Disabled (default), 60

C/140

F, 70

C/158

F, 80

C/176

F, 90

C/194

CPU/System Fan Fail Warning

Allows the system to emit warning sound if the CPU fan or system fans are not connected or fail. Check

the fan condition or fan connection when this occurs. (Default: Disabled)

CPU Fan Speed Control

Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.

Normal

Allows the CPU fan to run at different speeds according to the CPU temperature. You can

adjust the fan speed with EasyTune based on your system requirements. (Default)

Silent

Allows the CPU fan to run at slow speeds.

Manual Allows you to control the CPU/system fan speed under the Slope PWM item.

Disabled Allows the CPU fan to run at full speeds.

Slope PWM

Allows you to control the CPU/system fan speed. Allows you to control the CPU fan speed. This item is

configurable only when

CPU Fan Speed Control

is set to Manual. Options are: 0.75 PWM value /

C ~

2.50 PWM value /

1st/2nd/3rd System Fan Speed Control (SYS_FAN1, SYS_FAN2 and SYS_FAN3
Connectors)

Allows you to determine whether to enable the system fan speed control function for the system fans

connected to SYS_FAN1, SYS_FAN2 and SYS_FAN3 connectors and adjust the fan speed.

Normal

Allows the system fans to run at different speeds according to the system temperature. You

can adjust the fan speed with EasyTune based on your system requirements. (Default)

Silent

Allows the system fans to run at slow speeds.

Manual Allows you to control the system fan speed under the Slope PWM item.

Disabled Allows the system fans to run at full speeds.

Slope PWM

Allows you to control the system fan speed. This item is configurable only when

1st/2nd/3rd System FAN

Speed Control

is set to Manual. Options are: 0.75 PWM value /

C ~ 2.50 PWM value /

Summary of Contents for GA-Z77X-UD4H

























































































































Search results

Summary of Contents for GA-Z77X-UD4H

Reviews:

Related manuals for GA-Z77X-UD4H

Brands by name

Popular brands

Gigabyte GA-Z77X-UD4H, User Manual

Search results

Summary of Contents for GA-Z77X-UD4H

Reviews:

Related manuals for GA-Z77X-UD4H

Brands by name

Popular brands