Gigabyte GA-Z77X-UD4H User Manual Download

Page: 10 / 120

- 10 -

Hardware Installation

1-2 Product Specifications

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/Intel

Celeron

processors

in the LGA1155 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z77 Express Chipset

Memory

4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory

Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR3 1600/1333/1066 MHz memory modules

Support for non-ECC memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)

Onboard
Graphics

Integrated Graphics Processor:
- 1 x D-Sub port
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 1920x1200

- 1 x DisplayPort, supporting a maximum resolution of 2560x1600

Audio

Realtek ALC892 codec

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

1 x Realtek GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

(The PCIEX16 and PCIEX8 slots conform to PCI Express 3.0 standard.)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot

is populated, the PCIEX16 slot will operate at up to x8 mode.

* Whether PCI Express 3.0 is supported depends on CPU and graphics card

compatibility.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with all PCI Express x1 slots. All PCI Express

x1 slots will become unavailable when a PCIe x4 expansion card is installed.

3 x PCI Express x1 slots

(All PCI Express x1 slots conform to PCI Express 2.0 standard.)

1 x PCI slot

Multi-Graphics

Technology

Support for 2-Way AMD CrossFire

™

/NVIDIA SLI technology (PCIEX16 and PCIEX8)

Summary of Contents for GA-Z77X-UD4H

























































































































Search results

Summary of Contents for GA-Z77X-UD4H

Reviews:

Related manuals for GA-Z77X-UD4H

Brands by name

Popular brands

Gigabyte GA-Z77X-UD4H, User Manual

Search results

Summary of Contents for GA-Z77X-UD4H

Reviews:

Related manuals for GA-Z77X-UD4H

Brands by name

Popular brands