- 43 -
BIOS Setup
`
Advanced Memory Settings
(Note) This item is present only when you install a CPU and a memory module that support this feature.
&
Extreme Memory Profile (X.M.P.)
(Note)
, System Memory Multiplier, Memory
Frequency(MHz)
The settings above are synchronous to those under the same items on the
Advanced Frequency Settings
menu.
&
Performance Enhance
Allows the system to operate at three different performance levels.
Normal
Lets the system operate at its basic performance level.
Turbo
Lets the system operate at its good performance level. (Default)
Extreme
Lets the system operate at its best performance level.
&
DRAM Timing Selectable
Quick
and
Expert
allows the
Channel Interleaving
,
Rank Interleaving
, and memory timing settings below
to be configurable. Options are: Auto (default), Quick, Expert.
&
Profile DDR Voltage
When using a non-XMP memory module or
Extreme Memory Profile (X.M.P.)
is set to
Disabled
, this item
will display as
1.50V
. When
Extreme Memory Profile (X.M.P.)
is set to
Profile1
or
Profile2
, this item will
display the value based on the SPD data on the XMP memory.
&
Profile VTT Voltage
The value displayed here is dependent on the CPU being used.
&
Channel Interleaving
Enables or disables memory channel interleaving.
Enabled
allows the system to simultaneously access
different channels of the memory to increase memory performance and stability.
Auto
lets the BIOS
automatically configure this setting. (Default: Auto)
&
Rank Interleaving
Enables or disables memory rank interleaving.
Enabled
allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability.
Auto
lets the BIOS automatically
configure this setting. (Default: Auto)
