manualshive.com logo in svg

Gigabyte G242-P31, User Manual, Page: 94 / 101

Share
Download
Gigabyte G242-P31 User Manual Download Page 94

BIOS Setup

- 94 -

5-4-4 

BMC Network Configuration

Parameter

Description

BMC network configuration

Lan Channel 1

Configuration Address source

Select to configure LAN channel parameters statically or dynamically 

(DHCP). Do nothing option will not modify any BMC network parameters 
during BIOS phase.

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting 

is 

DynamicBmcDhcp

.

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example, 
192.168.000.001.

Router IP address

Displays the Router IP Address information. 

Station MAC address

Displays the MAC Address information. 

Real-time get BMC network 
address

Press [Enter] to synchronize the BMC network address

IPV6 Support

(Note)

Option available: Enabled/Disabled.
Default Setting is 

Disabled

.

(Note)  Advance items can be configurable when IPV6 Support is set to 

Enabled

.

Summary of Contents for G242-P31






































































































Reviews:

No comments