Gigabyte G242-P31 User Manual Download Page 74

Page: 74 / 101

BIOS Setup

- 74 -

5-2-9

Network Stack Configuration

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv4 PXE Support

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv4 HTTP Support

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is

Disabled

Ipv6 PXE Support

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is

Disabled

Ipv6 HTTP Support

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is

Disabled

IPSEC Certificate

Enable/Disable the IPSEC Certificate feature.

Media detect count

Press the <+> / <-> keys to increase or decrease the desired values.

Summary of Contents for G242-P31






































































































Search results

Summary of Contents for G242-P31

Reviews:

Gigabyte G242-P31, User Manual, Page: 74 / 101

Search results

Summary of Contents for G242-P31

Reviews: