manualshive.com logo in svg

Gigabyte E152-ZE0, User Manual

Share
Download
Gigabyte E152-ZE0 User Manual Download Page 99

- 45 -

BIOS Setup

5-3-3-2 DRAM Memory Mapping

Parameter

Description

DRAM Memory Mapping

Chipselect Interleaving

Interleave memory blocks across the DRAM chip selects for CPU 0.
Options available: Auto/Disabled. Default setting is 

Auto

.

BankGroupSwap

Configures the BankGroupSwap. BankGroupSwap (BGS) is a new memory 

mapping option in AGESA that alters how applications get assigned to 
physical locations within the memory modules. When this option sets to 
Auto, it is null: No help string.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

BankGroupSwapAlt

Configures the BankGroupSwapAlt.

Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Address Hash Bank

Enable/Disable bank address hashing.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Address Hash CS

Enable/Disable CS address hashing.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

Address Hash Rm

Enable/Disable RM address hashing.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

SPD Read Optimization

Enable/Disable SPD Read Optimization.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

Summary of Contents for E152-ZE0











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands