GIGA-BYTE TECHNOLOGY Z590 AORUS ULTRA User Manual Download Page 7

Page: 7 / 60

1-2 Product Specifications

CPU

LGA1200 package:

- 11th Generation Intel

Core

™

i9 processors/Intel

Core

™

i7 processors/

Intel

Core

™

i5 processors

- 10th Generation Intel

Core

™

i9 processors/Intel

Core

™

i7 processors/

Intel

Core

™

i5 processors/Intel

Core

™

i3 processors/

Intel

Pentium

processors/Intel

Celeron

processors*

* Limited to processors with 4 MB Intel

Smart Cache, Intel

Celeron

G5xx5 family.

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z590 Express Chipset

Memory

11th Generation Intel

Core

™

i9/i7/i5 processors:

- Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules

10th Generation Intel

Core

™

i9/i7 processors

- Support for DDR4 2933/2666/2400/2133 MHz memory modules

10th Generation Intel

Core

™

i5/i3/Pentium

/Celeron

processors:

- Support for DDR4 2666/2400/2133 MHz memory modules

4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

* Support for DisplayPort 1.2 version and HDCP 2.3

(Graphics specifications may vary depending on CPU support.)

Audio

Realtek

ALC4080 codec

Support for DTS:X

Ultra

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Intel

2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)

Wireless

Communication

Module

Intel

Wi-Fi 6 AX200

- WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band

- BLUETOOTH 5.1

- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

* Actual data rate may vary depending on environment and equipment.

- 7 -

Summary of Contents for Z590 AORUS ULTRA





























































Search results

Summary of Contents for Z590 AORUS ULTRA

Reviews:

Related manuals for Z590 AORUS ULTRA

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY Z590 AORUS ULTRA, User Manual

Search results

Summary of Contents for Z590 AORUS ULTRA

Reviews:

Related manuals for Z590 AORUS ULTRA

Brands by name

Popular brands