background image

Chapter 1  Hardware Installation

1-1  Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become 

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's 

manual and follow these procedures:

 

Prior to installation, make sure the chassis is suitable for the motherboard.

 

Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or 

warranty sticker provided by your dealer. These stickers are required for warranty validation.

 

Always remove the AC power by unplugging the power cord from the power outlet before 

installing or removing the motherboard or other hardware components.

 

When connecting hardware components to the internal connectors on the motherboard, make 

sure they are connected tightly and securely.

 

When handling the motherboard, avoid touching any metal leads or connectors.

 

It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic 

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, 

keep your hands dry and first touch a metal object to eliminate static electricity.

 

Prior to installing the motherboard, please have it on top of an antistatic pad or within an 

electrostatic shielding container.

 

Before connecting or unplugging the power supply cable from the motherboard, make sure 

the power supply has been turned off.

 

Before turning on the power, make sure the power supply voltage has been set according to 

the local voltage standard.

 

Before using the product, please verify that all cables and power connectors of your hardware 

components are connected. 

 

To prevent damage to the motherboard, do not allow screws to come in contact with the 

motherboard circuit or its components.

 

Make sure there are no leftover screws or metal components placed on the motherboard or 

within the computer casing.

 

Do not place the computer system on an uneven surface.

 

Do not place the computer system in a high-temperature or wet environment.

 

Turning on the computer power during the installation process can lead to damage to system 

components as well as physical harm to the user.

 

If you are uncertain about any installation steps or have a problem related to the use of the 

product, please consult a certified computer technician.

 

If you use an adapter, extension power cable, or power strip, ensure to consult with its installation 

and/or grounding instructions.

- 6 -

Summary of Contents for Z590 AORUS ULTRA





























































Reviews: