GIGA-BYTE TECHNOLOGY Z370XP SLI User Manual Download Page 11

Page: 11 / 48

1-7

Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 speciication and is compatible to the USB 2.0

speciication. Use this port for USB devices.

USB 3.1 Gen 2 Type-A Port (Red)

The USB 3.1 Gen 2 Type-A port supports the USB 3.1 Gen 2 speciication and is compatible to the USB

3.1 Gen 1 and USB 2.0 speciication. Use this port for USB devices.

USB Type-C

™

Port

The reversible USB port supports the USB 3.1 Gen 2 speciication and is compatible to the USB 3.1 Gen 1

and USB 2.0 speciication. Use this port for USB devices.

HDMI Port

The HDMI port supports HDCP 2.2 and Dolby TrueHD and DTS HD Master

Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM audio

output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor

being used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The
item name may differ depending on your operating system.)

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

State

Description

Blinking

Data transmission or receiving is occurring

No data transmission or receiving is occurring

Center/Subwoofer Speaker Out (Orange)

Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio coniguration.

Rear Speaker Out (Black)

Use this audio jack to connect rear speakers in a 7.1-channel audio coniguration.

Side Speaker Out (Gray)

Use this audio jack to connect side speakers in a 4/5.1/7.1-channel audio coniguration.

- 11 -

Summary of Contents for Z370XP SLI

















































Search results

Summary of Contents for Z370XP SLI

Reviews:

Related manuals for Z370XP SLI

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY Z370XP SLI, User Manual

Search results

Summary of Contents for Z370XP SLI

Reviews:

Related manuals for Z370XP SLI

Brands by name

Popular brands