GIGA-BYTE TECHNOLOGY Z370XP SLI User Manual Download Page 6

Page: 6 / 48

1-2 Product Speciications

CPU

Support for 8th Generation Intel

Core

™

i7 processors/Intel

Core

™

processors/Intel

Core

™

i3 processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z370 Express Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

Dual channel memory architecture

Support for DDR4 2666/2400/2133 MHz memory modules

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Proile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)

Onboard
Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

* Support for HDMI 1.4 version and HDCP 2.2.

Maximum shared memory of 1 GB

Audio

Realtek

ALC1220 codec

High Deinition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Intel

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is

populated, the PCIEX16 slot operates at up to x8 mode.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the M2Q_32G connector. The PCIEX4 slot

will become unavailable when an SSD is installed in the M2Q_32G connector.

3 x PCI Express x1 slots

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Multi-Graphics
Technology

Support for NVIDIA

Quad-GPU SLI

™

and 2-Way NVIDIA

SLI

™

technologies

Support for AMD Quad-GPU CrossFire

™

and 3-Way/2-Way AMD CrossFire

™

technologies

Storage Interface

Chipset:

1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and
PCIe x4/x2 SSD support) (M2P_32G)

1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD
support) (M2Q_32G)

6 x SATA 6Gb/s connectors

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

* Refer to "1-8 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

Intel

Optane

™

Memory Ready

- 6 -

Summary of Contents for Z370XP SLI

















































Search results

Summary of Contents for Z370XP SLI

Reviews:

Related manuals for Z370XP SLI

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY Z370XP SLI, User Manual

Search results

Summary of Contents for Z370XP SLI

Reviews:

Related manuals for Z370XP SLI

Brands by name

Popular brands