GIGA-BYTE TECHNOLOGY Z370XP SLI User Manual Download Page 27

Page: 27 / 48

Memory Multiplier Tweaker

Provides different levels of memory auto-tuning. (Default: Auto)

Channel Interleaving

Enables or disables memory channel interleaving.

Enabled

allows the system to simultaneously access

different channels of the memory to increase memory performance and stability.

Auto

lets the BIOS

automatically conigure this setting. (Default: Auto)

Rank Interleaving

Enables or disables memory rank interleaving.

Enabled

allows the system to simultaneously access different

ranks of the memory to increase memory performance and stability.

Auto

lets the BIOS automatically

conigure this setting. (Default: Auto)

Channel A/B Memory Sub Timings

This sub-menu provides memory timing settings for each channel of memory. The respective timing setting

screens are conigurable only when

Memory Timing Mode

is set to

Manual

Advanced Manual

. Note: Your

system may become unstable or fail to boot after you make changes on the memory timings. If this occurs,

please reset the board to default values by loading optimized defaults or clearing the CMOS values.

Advanced Voltage Settings

Advanced Power Settings

CPU Vcore Loadline Calibration

Allows you to conigure Load-Line Calibration for the CPU Vcore voltage. Selecting a higher level keeps

the CPU Vcore voltage more consistent with what is set in BIOS under heavy load.

Auto

lets the BIOS

automatically conigure this setting and sets the voltage following Intel's speciications. (Default: Auto)

VAXG Loadline Calibration

Allows you to conigure Load-Line Calibration for the CPU VAXG voltage. Selecting a higher level keeps

the CPU VAXG voltage more consistent with what is set in BIOS under heavy load.

Auto

lets the BIOS

automatically conigure this setting and sets the voltage following Intel's speciications. (Default: Auto)

CPU Core Voltage Control

This section provides CPU voltage control options.

Chipset Voltage Control

This section provides Chipset voltage control options.

DRAM Voltage Control

This section provides memory voltage control options.

Internal VR Control

This section provides VR voltage control options.

PC Health Status

Reset Case Open Status

Disabled

Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled

Clears the record of previous chassis intrusion status and the

Case Open

ield will

show "No" at next boot.

Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header. If the system chassis cover is removed, this ield will show "Yes", otherwise it will show "No". To

clear the chassis intrusion status record, set

Reset Case Open Status

Enabled

, save the settings to

the CMOS, and then restart your system.

- 27 -

Summary of Contents for Z370XP SLI

















































Search results

Summary of Contents for Z370XP SLI

Reviews:

Related manuals for Z370XP SLI

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY Z370XP SLI, User Manual

Search results

Summary of Contents for Z370XP SLI

Reviews:

Related manuals for Z370XP SLI

Brands by name

Popular brands