GIGA-BYTE TECHNOLOGY R281-2O0 Service Manual Download Page 93

Page: 93 / 124

- 93 -

BIOS Setup

(Note 1) Only appears when HDD sets to

RAID

Mode.

(Note 2) Only Supported when HDD is in

AHCI

RAID

Mode.

RAID Mode: When set to RAID, the SATA controller enables both its RAID and AHCI functions. You will
be allows access the RAID setup utility at boot time.

Options available: AHCI/RAID. Default setting is

AHCI

Alternate Device ID on RAID

(Note 1)

Enable/Disable Alternate Device ID on RAID mode.

Options available: Enable/Disable. Default setting is

Disabled

Please note that this option appears when HDD is in RAID Mode.

SATA Port 0/1/2/3/4/5/6/7

The category identifies SATA hard drives that are installed in the computer.

System will automatically detect HDD type.

Port 0/1/2/3/4/5/6/7

Enable/Disable Port 0/1/2/3/4/5/6/7 device.

Options available: Enable/Disable. Default setting is

Enable

Hot Plug (for Port 0/1/2/3/4/5/6/7)

(Note2)

Enable/Disable HDD Hot-Plug function.

Options available: Enable/Disable. Default setting is

Disable

Spin Up Device (for Port 0/1/2/3/4/5/6/7)

(Note2)

On an edge detect from 0 to 1, the PCH starts a COM reset initialization to the device.

Options available: Enable/Disable. Default setting is

Disable

Summary of Contents for R281-2O0





























































































































Search results

Summary of Contents for R281-2O0

Reviews:

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R281-2O0, Service Manual

Search results

Summary of Contents for R281-2O0

Reviews:

Brands by name

Popular brands