GIGA-BYTE TECHNOLOGY R281-2O0, Service Manual

Page: 13 / 124

- 13 - Hardware Installation
Expansion Slot
(R281-NO0)
Š
Riser Card CRS2131:
Š
- 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
Š
- 1 x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
Š
- 1 x PCIe x8 slots (Gen3 x8), Full height half-length
Š
Š
Riser Card CRS2132:
Š
- 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length, Occupied by
CNV3124, 4 x U.2 ports
Š
- 1 x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
Š
- 1 x PCIe x8 slots (Gen3 x8), Full height half-length
Š
Riser Card CRS2124:
Š
- 1 x PCIe x8 slots (Gen3 x0 or x8), Low profile half-length
Š
- 1 x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length, Occupied by
CNV3124, 4 x U.2 ports
Š
2 x OCP mezzanine slots
Š
- PCIe Gen3 x16
Š
- Type1, P1, P2, P3, P4, K2, K3
Š
- 1 x OCP mezzanine slot is Occupied by CNVO124, 4 x U.2 mezzanine card
Expansion Slot
(R281-N40)
Š
Riser Card CRS2131:
Š
- 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
Š
- 1 x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
Š
- 1 x PCIe x8 slots (Gen3 x8), Full height half-length
Š
Riser Card CRS2132:
Š
- 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
Š
- 1 x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
Š
- 1 x PCIe x8 slots (Gen3 x8), Full height half-length
Š
Riser Card CRS2124:
Š
- 1 x PCIe x8 slots (Gen3 x0 or x8), Low profile half-length
Š
- 1 x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length
Š
2 x OCP mezzanine slots
Š
- PCIe Gen3 x16
Š
- Type1, P1, P2, P3, P4, K2, K3
Š
- 1 x OCP mezzanine slot is Occupied by CNVO124, 4 x U.2 mezzanine card
Video
Š
Integrated in Aspeed® AST2500
Š
2D Video Graphic Adapter with PCIe bus interface
Š
1920x1200@60Hz 32bpp, DDR4 SDRAM
Storage
(R281-2O0)
Š
Front side: 12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
Š
2.5" HDD/SSD supported
Š
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Š
SAS card is required for SAS devices support