manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY R281-2O0, Service Manual

Share
Download
GIGA-BYTE TECHNOLOGY R281-2O0 Service Manual Download Page 116

BIOS Setup

- 116 -

5-7  Save & Exit Menu

The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then 
press 

Enter

. 

  Save Options
  Save Changes and Exit   

 

Saves changes made and closes the BIOS setup. 

 

Options available: Yes/No.   

  Discard Changes and Exit   

 

Discards changes made and exits the BIOS setup.

 

Options available: Yes/No.   

  Save Changes and Reset   

 

Restarts the system after saving the changes made. 

 

Options available: Yes/No.   

  Discard Changes and Reset   

 

Restarts the sysetm without saving any changes.

 

Options available: Yes/No.   

  Save Changes    

 

Saves changes made in the BIOS setup.

 

Options available: Yes/No.   

  Discard Changes

 

Discards changes made and closes the BIOS setup.

 

Options available: Yes/No.   

Summary of Contents for R281-2O0





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands