manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY R281-2O0, Service Manual

Share
Download
GIGA-BYTE TECHNOLOGY R281-2O0 Service Manual Download Page 80

BIOS Setup

- 80 -

5-3-4-2 Memory RAS Configuration

  Memory RAS Configuration Setup

  RAS Type

 

Displays the RAS type.

  Static Virtual Lockstep Mode

 

Enable/Disable the Static Virtual Lockstep mode.

 

Options available: Disable/Enable. Default setting is 

Disable

.

  Mirror Mode

 

Mirror Mode will set entire 1LM/2LM memory in system to be mirrored, consequently reducing the 
memory capacity by half. Enables the Mirror Mode will disable the XPT Prefetch.

 

Options available: Disable/Mirror Mode 1LM/Mirror Mode 2LM. Default setting is 

Disable

.

  Memory Rank Sparing

 

Enable/Disable Memory Rank Sparing.

 

Options available: Disable/Enable. Default setting is 

Disable

.  

  Correctable Error Threshold

 

Correctable Error Threshold (1-32767) used for sparing, tagging, and leaky bucket.

 

Press the <+> / <-> keys to increase or decrease the desired values. 

  SDDC Plus One

 

Enable/Disable SDDC Pluse One.

 

Options available: Disable/Enable. Default setting is 

Disable

. 

Summary of Contents for R281-2O0





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands