GIGA-BYTE TECHNOLOGY R281-2O0 Service Manual Download Page 106

Page: 106 / 124

BIOS Setup

- 106 -

5-4-3 BMC Network Configuration

Select NCSI and Dedicated LAN

Switch NCSI and dedicated LAN and send KCS command.

Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3 (Failover).

Default setting is

Mode1 (Dedicated)

Lan Channel 1

Configuration Address source

Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option will not

modify any BMC network parameters during BIOS phase.

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting is

DynamicBmcDhcp

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.

Please note that the IP address must be in three digitals, for example, 192.168.000.001.

Router IP address

Displays the Router IP Address information.

Station MAC address

Displays the MAC Address information.

Real-time synchronize BMC network parameter values

Press [Enter] to synchronize the BMC network parameter values.

Summary of Contents for R281-2O0





























































































































Search results

Summary of Contents for R281-2O0

Reviews:

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R281-2O0, Service Manual

Search results

Summary of Contents for R281-2O0

Reviews:

Brands by name

Popular brands