background image

- 95 -

BIOS Setup

Parameter

Description

RedirectForReturnDis

From a workaroud for GCC/C000005 issue for XV Core on CZ A0,
setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14

[DecfgNoRdrctForReturns] to 1.
Options available: Auto/1/0. Default option is 

Auto

.

Platform First Error Warning

Enable/Disable PFEH, cloak individual banks, and mask deferred error

interrupts from each bank.
Options available: Enabled/Disabled/Auto. Default option is 

Enabled

.

Core Performance Boost

Allows you to disable CPB.
Options available: Disabled/Auto. Default option is 

Auto

.

Global C-State Control

Controls the IO based C-state generation and DF C-states.
Options available: Disabled/Enabled/Auto. Default option is 

Auto

.

Power Supply Idle Control

Configures the power supply idle control.

Options available: Low Current Idle/Typical current Idle/Auto. Default
option is 

Auto

.

Opcache Control

Enables or disables the Opcache.
Options available: Disabled/Enabled/Auto. Default option is 

Auto

.

SEV ASID Count

This field specifies the max. valid ASID, which affects the maximum

system physical address space. 16TB of physical address space is
available for systems that support 253 ASIDs, while 8TB of physical
address space is available for systems that support 509 ASIDs.
Options available: 253 ASIDs/509 ASIDs/Auto. Default option is 

Auto

.

SEV-ES ASID Space Limit 
Control

Space limit control for SEV-ES ASIDs.
Options available: Auto/Manual. Default option is 

Auto

.

Streaming Stores Control

Enables or disables the streaming stores functionality.
Options available: Disabled/Enabled/Auto. Default option is 

Auto

.

Local APIC Mode

Sets the Local APIC mode.
Options available: xAPIC/x2APIC/Auto. Default option is 

Auto

.

ACPI_CST C1 Decaration

Determines whether or not to declare the C1 state to the OS.
Options available: Disabled/Enabled/Auto. Default option is 

Auto

.

MCA error thresh enable

Enable MCA error thresholding.
Options available: False/True/Auto. Default option is 

Auto

.

SMU and PSP Debug Mode

When this option is enabled, specific uncorrected errors detected by the
PSP FW or SMU FW will hand and not reset the system.

Options available: Disabled/Enabled/Auto. Default option is 

Auto

.

Summary of Contents for R182-Z90
























































































































































Reviews: