GIGA-BYTE TECHNOLOGY R182-Z90, User Manual

Page: 102 / 151

- 103 - BIOS Setup
Parameter Description
SMU Common Options
Press [Enter] for more options.
Š
Determinism Control
– Auto = Use the fused determinism, Manual = User can set
customized determinism.
– Options available: Manual/Auto. Default option is Manual .
Š
cTDP Control
– Auto = Use the fused TDP, Manual = User can set customized
TDP. TDP is used to define the RC thermal model only.
– Options available: Manual/Auto. Default option is Manual .
Š
Fan Control
– Press [Enter] to configure the fan control table.
Š
CLD0_VDDP Control
– Manual = User can set customized CLD0_VDDP voltage.
– Options available: Auto/Manual. Default option is Auto .
Š
EfficiencyModeEn
– 0 = use performance optimized CCLK DPM settings, 1 = use
power efficiency optimized CCLK DPM settings.
– Options available: Auto/Enabled. Default option is Auto .
Š
Package Power Limit Control
– Auto = Use the fused PPT, Manual = User can set PPT. PPT will
be used as the ASIC power limit.
– Options available: Manual/Auto. Default option is Manual .
Š
xGMI Link Width Control
– Auto = Use degault xGMI link width controller, Manual = User can
set custom xGMI link width controller settings.
– Options available: Manual/Auto. Default option is Auto .
Š
APBDIS
– 0 = not APBDIS (mission mode), 1 = APBDIS.
– Options available: 0/1/Auto. Default option is Auto .
Š
DF Cstates
– Enable or disable DF C-states.
– Options available: Disabled/Enabled/Auto. Default option is Auto .
Š
CPPC
– Enable or disable CPPC.
– Options available: Disabled/Enabled/Auto. Default option is Auto .
Š
BoostFmaxEn
– Auto = Use degault Fmax, Manual = User can set boost Fmax.
– Options available: Manual/Auto. Default option is Auto .