GIGA-BYTE TECHNOLOGY R182-Z90, User Manual

Page: 14 / 151

Hardware Installation - 14 -
Storage
R182-Z90
Š
4 x 3.5" hot-swappable HDD/SSD bays
Š
2.5" HDD/SSD supported
NOTE: SAS card is required for SAS devices support
R182-Z91
Š
8 x 2.5" SATA/SAS
Š
2 x 2.5" NVMe hot-swappable HDD/SSD bays
NOTE: SAS card is required for SAS devices support
R182-Z92
Š
10 x 2.5" NVMe hot-swappable SSD bays
SAS N/A
Internal
Connectors
Š
1 x M.2 slot
Š
1 x USB 3.0 header
Š
1 x COM header
Š
1 x TPM header
Š
1 x Front panel header
Š
1 x HDD back plane board header
Š
1 x PMBus connector
Š
1 x IPMB connector
Š
1 x Clear CMOS jumper
Š
1 x BIOS recovery jumper
Front Panel
LED/Buttons
Š
2 x USB 3.0
Š
1 x Power button with LED
Š
1 x ID button with LED
Š
1 x NMI button
Š
1 x Reset button
Š
2 x LAN activity LEDs
Š
1 x HDD activity LED
Š
1 x System status LED
Rear Panel I/O
Š
2 x USB 3.0
Š
1 x VGA
Š
2 x RJ45
Š
1 x MLAN
Š
1 x ID button with LED
Backplane I/O
Š
Backplane P/N: 9CBP10A3NR-00
Š
Speed and bandwidth:
Š
SAS 12Gb/s, SATA 6Gb/s, PCIe Gen3 x4
TPM
Š
1 x TPM header with LPC interface
Š
Optional TPM2.0 kit: CTM000