GIGA-BYTE TECHNOLOGY GA-X99-Ultra Gaming User Manual Download Page 87

Page: 87 / 128

- 87 -

Unique Features

Step 2:

The screen will show that the BIOS file is being read from your USB flash drive. Please select

Fast

Intact

begin the BIOS update. The screen will then display the update process.

Step 3:
The system will restart after the update process is complete.

•

Do not turn off or restart the system when the system is reading/updating the BIOS.

•

Do not remove the USB flash drive or hard drive when the system is updating the BIOS.

Step 4:
During the POST, press <Delete> to enter BIOS Setup. Select

Load Optimized Defaults

on the

Save & Exit

screen and press <Enter> to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update,
so we recommend that you reload BIOS defaults.

Step 5:
Select

Save & Exit Setup

and press <Enter>. And then select

Yes

to save settings to CMOS and exit BIOS

Setup. The procedure is complete after the system restarts.

Select

Yes

to load BIOS defaults

Summary of Contents for GA-X99-Ultra Gaming

































































































































Search results

Summary of Contents for GA-X99-Ultra Gaming

Reviews:

Related manuals for GA-X99-Ultra Gaming

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-X99-Ultra Gaming, User Manual

Search results

Summary of Contents for GA-X99-Ultra Gaming

Reviews:

Related manuals for GA-X99-Ultra Gaming

Brands by name

Popular brands