GIGA-BYTE TECHNOLOGY GA-X99-Ultra Gaming, User Manual

Page: 56 / 128

BIOS Setup - 56 -
2-6 Peripherals
&
Initial Display Output
Specifies the first initiation of the monitor display from the PCI Express graphics cards.
PCIEX16_1 Slot Sets the PCI Express graphics card on the PCIEX16_1 slot as the first display.
(Default)
PCIEX16_2 Slot Sets the PCI Express graphics card on the PCIEX16_2 slot as the first display.
PCIEX8_1 Slot Sets the PCI Express graphics card on the PCIEX8_1 slot as the first display.
PCIEX8_2 Slot Sets the PCI Express graphics card on the PCIEX8_2 slot as the first display.
&
OnBoard LAN Controller (Rivet Networks Killer
™
E2500 LAN Chip, LAN2)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled .
&
EZ RAID
Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions
on configuring a RAID array.
&
PCIE x16 slot LED
Enables or disables the PCIe x16 slots LEDs.
On All of the PCIe x16 LEDs stay constantly lit. (Default)
Off Disables this function.
Auto The PCIe x16 LEDs are lit only when the corresponding PCIe x16 slot is populated.
`
Ambient LED
&
LED Color
Allows you to change the color of the onboard audio LEDs.