GIGA-BYTE TECHNOLOGY GA-X99-Ultra Gaming User Manual Download Page 20

Page: 20 / 128

- 20 -

Hardware Installation

C-2. To Enable SLI Function

After installing the graphics card driver in the operating system,
go to the

NVIDIA Control Panel

. Browse to the

Configure SLI,

Surround, Physx

screen and ensure

Maximize 3D performance

is enabled.

C. Configuring the Graphics Card Driver

C-1. To Enable CrossFire Function

After installing the graphics card driver in the operating system, go
to the

AMD Catalyst Control Center

. Browse to

Performance\

AMD CrossFireX

™

and ensure the

Enable AMD CrossFireX

check box is selected. If your system has more than two CrossFire
cards, select the GPU combination you want to use and click

Apply

. (Available combination options are dependent on the

number of graphics cards.)

Summary of Contents for GA-X99-Ultra Gaming

































































































































Search results

Summary of Contents for GA-X99-Ultra Gaming

Reviews:

Related manuals for GA-X99-Ultra Gaming

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-X99-Ultra Gaming, User Manual

Search results

Summary of Contents for GA-X99-Ultra Gaming

Reviews:

Related manuals for GA-X99-Ultra Gaming

Brands by name

Popular brands