manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY G481-HA0, User Manual, Page: 98 / 124

Share
Download
GIGA-BYTE TECHNOLOGY G481-HA0 User Manual Download Page 98

BIOS Setup

- 98 -

Parameter

Description

PCIe Error Enabling

Press [Enter] to configure advanced items.

 

Š

Corrected Error

 

– Enables and escalates Correctable Errors to error pins.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

Uncorrected Error

 

– Enables and escalates Uncorrectable/Recoverable Errors to error pins.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

Fatal Error Enable

 

– Enables and escalates Fatal Errors to error pins.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

SERR Propagation

 

– Enable/Disable SERR propagation.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

PERR Propagation

 

– Enable/Disable PERR propagation.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

Summary of Contents for G481-HA0





























































































































Reviews:

No comments