manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY G481-HA0, User Manual, Page: 108 / 124

Share
Download
GIGA-BYTE TECHNOLOGY G481-HA0 User Manual Download Page 108

BIOS Setup

- 108 -

There are two types of passwords that you can set:

•  Administrator Password
 

 

Entering this password will allow the user to access and change all settings in the Setup Utility. 

•  User Password
 

 

Entering this password will restrict a user’s access to the Setup menus. To enable or disable  

 

 

this field, a Administrator Password must first be set. A user can only access and modify the  

 

 

System Time, System Date, and Set User Password fields.

5-5  Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up 
access passwords. 

Parameter

Description

Administrator Password

Press [Enter] to configure the administrator password.

User Password

Press [Enter] to configure the user password.

Secure Boot

Press [Enter] to configure advanced items.

Summary of Contents for G481-HA0





























































































































Reviews:

No comments