manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY G481-HA0, User Manual, Page: 93 / 124

Share
Download
GIGA-BYTE TECHNOLOGY G481-HA0 User Manual Download Page 93

- 93 -

BIOS Setup

5-3-7 

PCH Configuration 

Parameter

Description

PCH Configuration

PCH SATA Configuration

Press [Enter] to configure advanced items.

 

Š

SATA Controller

 

– Enable/Disable SATA controller.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

Configure SATA as

 

–

Configures on chip SATA type.

 

– AHCI Mode: When set to AHCI, the SATA controller enables its 

AHCI functionality. Then the RAID function is disabled and cannot 
be access the RAID setup utility at boot time.

 

– RAID Mode: When set to RAID, the SATA controller enables both 

its RAID and AHCI functions. You will be allowed to access the 
RAID setup utility at boot time.

 

– Options available: AHCI/RAID. Default setting is 

AHCI

.

 

Š

Alternate Device ID on RAID

(Note 1)

 

– Enable/Disable Alternate Device ID on RAID mode.

 

– Options available: Enable/Disable. Default setting is Disabled

 

– Please note that this option appears when HDD is in 

RAID Mode

.

 

Š

SATA Port 0/1/2/3/4/5/6/7

 

–

The category identifies SATA hard drives that are installed in the 

computer. System will automatically detect HDD type. 

Summary of Contents for G481-HA0





























































































































Reviews:

No comments