manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY G481-HA0, User Manual, Page: 75 / 124

Share
Download
GIGA-BYTE TECHNOLOGY G481-HA0 User Manual Download Page 75

- 75 -

BIOS Setup

(Note)  Functions available on selected models.

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

PCI Express Slot #1-1 / #1-2 / #2-1 / 
#2-2 / #3-1 / #3-2 / #4-1 / #4-2 / #9 / 
#10 / #11 / #12 / #13 / #14 / #15 / #16 / 
#17 I/O ROM

(Note)

When enabled, this setting will initialize the device expansion 
ROM for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN1 / LAN2 Controller

(Note)

Enable/Disable the onboard LAN1 / LAN2 devices.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN1 / LAN2 I/O ROM

(Note) 

Enable/Disable the onboard LAN1 / LAN2 devices, and initializes 
device expansion ROM.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

PCI Devices Common Settings

Above 4G Decoding

Enable/Disable memory mapped I/O to 4GB or greater address 
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is 

Disabled

.

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item 
Enable/Disable Single Root IO Virtualization Support. 
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Summary of Contents for G481-HA0





























































































































Reviews:

No comments