GIGA-BYTE TECHNOLOGY G481-HA0 User Manual Download Page 87

Page: 87 / 124

- 87 -

BIOS Setup

Parameter

Description

Interleave NVDIMMs

Controls if NVDIMMs are interleaved together or not.
Options available: Enable/Disable. Default setting is

Disable

Assert ADR on Reset

Enable/Disable Assert ADR on Reset.
Options available: Enable/Disable. Default setting is

Disable

Assert ADR on S5

Enable/Disable Assert ADR on S5.
Options available: Enable/Disable. Default setting is

Disable

Memory Topology

Press [Enter] to configure advanced items.

Memory Map

Press [Enter] to configure advanced items.

IMC Interleaving

–

Select to configure IMC Interleaving.

– Options available: Auto/1-way Interleave/2-way Interlave.

Default setting is

Auto

Memory RAS Configuration

Press [Enter] to configure advanced items.

RAS Type

– Displays the RAS type.

Static Virtual Lockstep Mode

– Enable/Disable the Static Virtual Lockstep mode.

– Options available: Disable/Enable. Default setting is

Disable

Mirror Mode

– Mirror Mode will set entire 1LM/2LM memory in system to be

mirrored, consequently reducing the memory capacity by half.
Enables the Mirror Mode will disable the XPT Prefetch.

– Options available: Disable/Mirror Mode 1LM/Mirror Mode 2LM.

Default setting is

Disable

Memory Rank Sparing

– Enable/Disable Memory Rank Sparing.

– Options available: Disable/Enable. Default setting is

Disable

Correctable Error Threshold

– Correctable Error Threshold (1-32767) used for sparing,

tagging, and leaky bucket.

– Press the <+> / <-> keys to increase or decrease the desired

values.

SDDC Plus One

– Enable/Disable SDDC Plus One.

– Options available: Disable/Enable. Default setting is

Disable

Summary of Contents for G481-HA0





























































































































Search results

Summary of Contents for G481-HA0

Reviews:

GIGA-BYTE TECHNOLOGY G481-HA0, User Manual, Page: 87 / 124

Search results

Summary of Contents for G481-HA0

Reviews: