TrafficLED / CircLED
Seite 14 / 22
Created
15.06.2015
chal
Modified
04.10.2017
roen
Object-ID
989827
4.2 Installation instructions for the levelling console
Using four 4x12 mm chipboard screws, screw the
installation box onto the retaining plate from below.
Insert the 3 levelling nuts into the slots of the retaining
plate brackets and position them over the base plate us-
ing the 3 threaded rods.
Screw the 3 levelling nuts uniformly onto the threaded
rods.
Place the spacer plate and pipe clamps on the
retaining plate and lightly screw in two M4x12mm
screws by hand.
Do this on both sides in the case of continuous wiring.
Distance plate
connection
screw
fixing clamp
mounting plate
