Gicam WIN6, Manual

Page: 15 / 28

Input and output
Input
1 Reset displayed value (auto tare)
Output
1 Set-point output 1 positive intervention
2 Set-point output 2 positive intervention
3 Set-point output 2 positive or negative intervention
The relays are normally energized.
When a set point is exceeded, the relative relay de-energizes.
When a set point has a value of zero, its output is always de-energized.
All relays de-energize (alarm condition), when the following conditions occur: cell cable breakages or weight
outside the nominal range (NO CON) or exceeding the maximum weight (upper dashes).
Commissioning the instrument
To put the instrument into operation, after installation and wiring of the connections, the following operations
must be carried out:

Set the weight calibration data

Perform the weight calibration

Set the parameters and set-points according to your needs
Pagina – page – Seite 13