Gicam WIN6, Manual

Page: 22 / 28

Output configuration
Set point programming
The set threshold values are compared with the weight to drive the relative relay.

If the value of the threshold in memory is 0, the relative relay is always de-energized.
In this way the instrument can only be used with a weight lower than a set threshold.

When the weight is not detectable or out of scale, the relays are all de-energized
(open contact).
Excitation delay
Output excitation delay with respect to the occurrence of the condition (in 1/10 sec.).
Programming polarity of intervention of the logic output 3
The intervention can be in positive or negative.
SEt 1
SEt 2
SEt 3
Pol 3
dEl 1
dEl 2
dEl 3
Pagina – page – Seite 20