Gicam 06-TRN, User Manual

Page: 19 / 36

Pagina – page – Seite 17
Display the selected scale
Pressing this button from the weight display screen to display the selected scale value: the
instrument displays the indication
MV
if the instrument is set to be displaying in millivolts; oth-
erwise it displays the indication
SCL
, and then displays the scale value.
In the data entry pages of the configuration menus, pressing this button saves the value just
introduced, while a prolonged pressure allows you to return to the previous screen.
Menu
To access the list of configuration menus, press the two keys and simultaneously from the weight
display screen for at least two seconds.
The menus are in a sequential list, the and keys now act as navigation arrows when moving from
one menu to another.
Once you reach the desired menu, press to display the value associated with the menu.
Long press for more than two seconds returns to the weight display screen.
Weight filter
(the display indicates
FLt
)
Filter to increase the stability of the load cell input signal. .
A filter with a very low value allows a higher weight resolution, but it may not be suitable for systems with
large disturbances or vibrations.
A filter with a high value significantly stabilizes the weight, but decreases its minimum resolution, thus los-
ing in precision of the indicated value.
Use the and keys to change the filter value. Press to store it.
Pressing for longer than two seconds takes you back to the menu list.
Decimals displayed
(the display indicates
dEC
)
Number of decimals displayed on the weight screen.
If you are viewing the converter utilization percentage, the number of decimals is automatically considered
1. Therefore setting a different value will have no effect. For all other scale values the number of decimals
can vary from a minimum of 0 to a maximum of 3.
Use the and keys to change the decimals value. Press to store it.
Pressing for longer than two seconds takes you back to the menu list.