
44
45
TAIMEN
TAIMEN
UK
UK
COURTESY AND FLASHING LIGHTS SIGNALS
0,8s ON, 0,8s OFF
0,4s ON, 0,4s OFF
2s ON, 2s OFF
5 fast blinkings
3 slow blinkings
3 slow blinkings
4 slow blinkings
4 slow blinkings
Fixed light for 5s after
a travel learning cycle
Photocell (in
oc
mode) intercepted at
rest and a start command is launched
Frame 8k2 intercepted at rest and a start
command is launched
Frame 8k2 intercepted in pause or at rest
and a start command is launched
Low battery at the beginning of opening
or closing
Low battery at the beginning of closing
Opening
Closing
Travel learning cycle
Travel learning cycle failed
Releasing command,
the door opens
Door blocked and
closed
Door blocked and
open
Door blocked
Door blocked and
open
The door is opening
The door is closing
A travel learning cycle
begins at
a start command
Entering
mode
FLASHING
FLASHING
FL
COURTESY
FL
COURTESY
FL
COURTESY
FL
COURTESY
FL
COURTESY
FL
COURTESY
FL
COURTESY
SIGNAL
MEANING
EFFECT
LIGHT
INSTALLATION COMPLIANCE WITH THE REGULATION
When an existing door/gate is
responsible for the safety of the automated device and has to comply with the provisions provided by the
2006/42/CE Directive.
To make easier the certification process, Gi.Bi.Di. put at your disposal on its website WWW.GIBIDI.COM some
guides and replies to the more frequent questions.
automated, it becomes a machine and the installer becomes the builder. He is
Declaration of conformity CE
The manufacturer:
GI.BI.DI.
Via Abetone Brennero, 177/B,
46025 Poggio Rusco (MN) ITALY
:
are in conformity T
:
•
:
•
•
Date 01/10/2018
S.r.l.
declares that the products
ELECTROMECHANICAL OPERATORS TAIMEN T6-T12
o the following CEE Directives
and that the following harmonised standards have been applied
LVD Directive 2006/95/CE and subsequent amendments
;
•
EMC Directive 2004/108/CE and subsequent amendments
;
EN60335-1,
EN61000-6-1, EN61000-6-3
Moreover declares that the product must not be used until the machine in
which it has been incorporated has not been declared in accordance with
2006/42/CE Directive.
The Legal Representative
Michele Prandi
Summary of Contents for TAIMEN T12
