GiBiDi TAIMEN T12 Instructions For Installation Manual Download Page 35

Page: 35 / 48

TAIMEN

TRANSMITTERS MANAGEMENT

Learning procedure:

When the operator has stopped, push and release the LEARN button.

appears on the display, the flashing light and courtesy light start blinking slowly.

Push within 6 seconds any button of the transmitter you want to store.

The flashing light and courtesy light will do 3 fast blinkings to confirm that the storage has been completed.

Push within 6 seconds any button of another transmitter to be stoted or wait to go out from the procedure.

Alternative learning procedure:

It is necessary to have a transmitter already stored.

When the operator has stopped, push for 10 seconds the button 1 and 2 of a transmitter already stored.

appears on the display, the flashing light and courtesy light start blinking slowly.

Push within 6 seconds any button of the transmitter you want to store.

The flashing light and courtesy light will do 3 fast blinkings to confirm that the storage has been completed.

Push within 6 seconds any button of another trasmitter to be stored or wait to go out from the procedure.

Complete cancellation of storage transmitters procedure:

When the operator has stopped, push for 8 seconds the LEARN button.

appears on the display, the flashing light and courtesy light start blinking slowly.

The flashing light and courtesy light will do 3 fast blinkings to confirm that the cancellation has been completed.

Release the LEARN button.

Assigning specifical functions to transmitter buttons:

It is possible to assign different functions to the transmitter buttons by setting

parameter.

TRAVEL LEARNING AND ANTI-CRUSHING THRESHOLDS

During travel learning procedure, the software stores operation times and automatically learns the amperometric
values for the correct operation of the anti-crushing system.
The anti-crushing parameters can be modified later by menu

Travel learning procedure:

Ÿ
Ÿ

will appear on the display, the flashing light and courtesy light will blink slowly.

Push and release the button CONFIRM or any button of a transmitter stored or enable the input NO.

The operator will do the following learning automatic manoeuvres :

Complete closing in slow down.

Complete opening at high speed (menu

Complete closing at high speed (menu

Complete opening at high speed with slow down (menu

Complete closing at high speed with slow down (menu

During automatic learning manoeuvres :

Any interaction (photocells, frame, input NO, CONFIRM button) causes the end of the learning procedure that
must be repeated from the beginning.

Anti-crushing system is disabled.

After the procedure, the flashing light and courtesy light will do 3 fast blinkings to confirm that the learning has
been completed,

will not appear on the display any more, the flashing light and courtesy light will not blink

any more.

When the operator has stopped and blocked, push the button CONFIRM for 5 seconds.

OPERATION PARAMETERS MODIFICATION

Access to the menu:

Ÿ
Ÿ

, the first parameter of the menu, will appear on the display.

Use b or - to display the available parameters.

Push the button CONFIRM to modify the parameter chosen or LEARN to go out from the menu.

In case the parameter has been modified, slide the available options with b or -.

If you want to save the modification done, push the button CONFIRM, the selection will blink fast and the
parameter just modified will appear again on the display.

If you do not want to save the modification done, push LEARN to return to previous menu and do not save the
modification.

When the motor has stopped, push the b and - at the same time and release them.

Conﬁrm

Learn

Conﬁrm

Learn

Conﬁrm

Learn

Conﬁrm

Learn

Conﬁrm

Learn